TIDUEC2B October 2018 – May 2020
| PARAMETER | TEST CONDITIONS | MIN | NOM | MAX | UNIT |
|---|---|---|---|---|---|
| INPUT CONDITIONS | |||||
| Input voltage (VINAC) | _ | 85 | 230 | 265 | VAC |
| Frequency (fLINE) | _ | 47 | 50 | 63 | Hz |
| No load power (PSB) | _ | _ | 200 | _ | mW |
| OUTPUT CONDITIONS | |||||
| Output voltage | Full load (500 W) | 24 | V | ||
| Output current | Full load (500 W) | 21 | A | ||
| Line regulation | VIN from 85 VAC to 265 VAC, 500-W load | 0.5 | % | ||
| Load regulation | VIN = 230 V, output load from 50 W–500 W | 1 | % | ||
| Output voltage ripple | VIN = 230 V, load = 500 W, | 200 | mV | ||
| Output power (nominal) | 500 | W | |||
| SYSTEM CHARACTERISTICS | |||||
| Efficiency (η) | VIN = 230-V AC RMS and full load at 24-V output | 94.5 | % | ||
| VIN = 115-V AC RMS and 230-W load at 24-V output | 92 | % | |||
| Protections | Output overcurrent | 25 | A | ||
| Output overvoltage | 30 | V | |||
| Operating ambient | Open frame | -10 | 25 | 55 | °C |
| Standards and norms | Power line harmonics | As per IEC 61000-3- 2 Class A | |||
| Conducted emissions | EN55022 Class B | ||||
| EFT | As per IEC-61000-4-4 | ||||
| Surge | As per IEC-61000-4-5 | ||||
| Board form factor | FR4 material, 2-layer, 2-oz copper | 160 × 80 × 35 | mm | ||